供应喷水塑编织机

编织机的广泛实用性

VARIOUS APPLICATION OF WEAVING

HPW喷水塑编机不论是P·P、P.E还是各种包装纸、集装箱袋等高克重

产品，均能保证安全稳定生产。

HPW Type of Hydraulic Loom is designed to evenly weave all kinds of

packing sheets,container bags and goods with fine denier, as well as

P.P、P.E

最好的生产性能

BESTER PRODUCTIVITY

HPW喷水塑编机不仅可扩幅编织，而且而且根据编织条件最高可达到

750 RPM，而且还可以调整现场的氛围。

750RPM without any overload according to the weavingcondition,so

that this loom shall make the workshop environment more comfortable

技术说明

Technical specifications

1.基础用直径为10mm的钢筋，以150-200间隔成格子状

混凝土厚度要求在250mm以上。（视当地土质状况而定）

2排水沟坡度为4/1000，最浅处在75mm以上。

3.设备安装定位后，在地脚螺栓予留孔于螺栓间灌注混凝土砂浆。

4设备安装支承面高出地面基准3mm。

1. Use reinforcing steel bar with diameter 10 for basis，making a grid with intervals of 150-200.

Thickness of concrete shall be above 250mm.(to be determined by soil texture)

2.Gradient of drain 4/1000，the most shallow point above 75mm

3.After positioning，fill concrete mortar in the gap between foundation bolt and its hole

4. Bearing surface shall be 3mm above foundation benchmark.